HOW TO SHOP

1Select currency and product quantity
2Review cart contents and add customer detail
3Pay via PayPal (can use credit card)

Office Hours

Mon-Fri 8:00AM - 5:00PM
For general support, send an email to [email protected]

I'm having trouble receiving data from the DMU11

The DMU11 Output Message is output on a RS422 Serial interface at 460,800 baud using a non-return to zero protocol. The DMU11 RS422 driver does not include a 120 ohm termination resistor which is normally associated with the RS422 interface. Therefore if the user is not going to use the receive feature of the DMU11 (RX Lo and Rx Hi), then a 120 ohm termination resistor needs to be inserted between Pins 3 and 4 of the connector. Pins 3 and 4 should not be left unterminated since noise received on Pins 3 or 4 could cause the DMU11 to stop transmitting data on its transmit lines. Ideally, the termination resistor should be placed as close to the connector as possible.

Like our page

Click to follow us

Follow Us

Click to tweet us

See our channel

View our latest videos

SIGN IN YOUR ACCOUNT TO HAVE ACCESS TO DIFFERENT FEATURES

CREATE ACCOUNT

FORGOT YOUR DETAILS?

TOP