HOW TO SHOP

1Select currency and product quantity
2Review cart contents and add customer detail
3Pay via PayPal (can use credit card)

Office Hours

Mon-Fri 8:00AM - 5:00PM
For general support, send an email to [email protected]

Welcome to Silicon Sensing

Silicon Sensing Systems has unrivalled expertise in the design and manufacture of high performance inertial measurement sensors and systems. We constantly push the boundaries of what is possible through the use of patented silicon MEMS structures, which are manufactured in our own foundry in Japan. Assessment of our latest gyro sensors and systems show that, in critical areas such as bias instability and angle random walk, these high performance devices deliver performance equivalent to far larger, heavier and more expensive fibre optic-based units.  The success of our inertial measurement technology is evident in the tens of million sensors we have delivered to customers since we were established over 20 years ago.

With our products is use on the most hazardous terrains and in the most extreme conditions, Silicon Sensing has a wide range of sensors and systems to meet your specifications at any time, in any conditions, on any terrain.  To find out more, see below or click the product image opposite.  To talk to us simply submit the brief form below, and we will be in touch.

A little bit more about the DMU30

Product description

High Performance MEMS IMU

An affordable non-ITAR MEMS IMU alternative to 'FOG-Grade' IMUs for use in exacting motion sensing applications.

The first of a family of High Performance IMUs (HPIMUs), DMU30 is a ground-breaking, non-ITAR, MEMS IMU for use in applications ranging from unmanned vehicle navigation to surveying and mapping.

Available now, the DMU30 is proving a formidable choice for affordable high-performance IMUs.  Two standard variants offer different baud rates to suit application needs.  Datasheet and Solid Model CAD files for the DMU30 can be downloaded from the Downloads tab.

The basic inertial data output from DMU30 is angular rate (deg/s) and acceleration (g).  Delta Theta and Delta Velocity outputs can be considered as a re-scaling of these basic data outputs.   Provision and use of these values is an industry standard expected and used by many of our customers.

Delta Theta is in degrees and represents the degrees rotated over the sampling time of 5.0ms (or 1/200th of a second).  For example, if the IMU axis is rotating at 200deg/s, Delta Theta will be 1 deg.

Similarly, Delta Velocity is a re-scaling from g to m/s, representing the change in velocity change over the same 5ms.  The output in m/s is equal to the acceleration in g multiplied by 0.04903325 (divide by 200 and multiply by 9.80665, the latter being a universal measure of g).

24-bit sigma delta analogue to digital convertors are used within DMU30. Compensation is carried out using single precision floating point mathematics. The DMU30 output message is also output as single precision floating point numbers. So the mathematical resolution is very small indeed.

In practical terms, the minimum resolvable change is dominated by the sensor noise. With averaging, this can be improved to a point where the minimum resolvable change is dictated by the bias instability derived from Allan Deviation plots. For the gyro channels this is below 0.1 deg/hr and for the accelerometers, around 10μg.

Contact us

Like our page

Click to follow us

Follow Us

Click to follow us

Our company profile

Click to follow us

See our channel

View our latest videos

SIGN IN YOUR ACCOUNT TO HAVE ACCESS TO DIFFERENT FEATURES

CREATE ACCOUNT

FORGOT YOUR DETAILS?

top